- Flows up to 2.2 L/s
- Pressure differential backwash control
- Control panel with indication lights
- Low consumption for backwash
- Screen sizes available as detailed below
- 304 Grade stainless steel housing
- Min operating presssure: 200kPa
- Max operating pressure: 500kPa
- 25mm (1”) BSPM Inlet/Outlet
- 32mm (1 1/4”) BSPM Inlet/Outlet
-
-
- Flows up to 12.5 L/s
- Pressure differential backwash control
- Control panel with indication lights and volt free contacts
- Low consumption for backwash
- Screen sizes available as detailed below
- 304 Grade stainless steel housing (316L available)
- Min operating presssure: 200kPa
- Max operating pressure: 1,000kPa
- 50mm BSP, 80mm BSP, DN80 flange inlet/outlet
- Backwash counter to monitor number of cleaning cycles performed
-
- Flows up to 33.0 L/s
- Pressure differential backwash control
- Control panel with indication lights and volt free contacts
- Low consumption for backwash
- Screen sizes available as detailed below
- 304 Grade stainless steel housing (316L available)
- Min operating presssure: 200kPa
- Max operating pressure: 1,000kPa
- 80mm (3”) BPSM & DN100/DN150 Flange Inlet/Outlet
- Backwash counter to monitor number of cleaning cycles performed
-
- Flows up to 86.0 L/s
- Pressure differential backwash control
- Control panel with indication lights and volt free contacts
- Low consumption for backwash
- Screen sizes available as detailed below
- 304 Grade stainless steel housing (316L available)
- Min operating presssure: 200kPa
- Max operating pressure: 1,000kPa
- DN100, DN150, DN200, DN250 Flange Inlet/Outlet
- Backwash counter to monitor number of cleaning cycles performed
-
- Compact modular design, can be connected in stacks.
- Minimal pipework due to innovative manifold meaning less maintenance, and smaller footprint.
- Pump incorporates energy recovery from high pressure brine flow which provides over 60% of the drive energy providing very kWh/m3 of desalinated water.
- Axial-piston high pressure pump constructed of corrosion resistant Duplex and Super Duplex steel. Non metallic parts are manufactured from corrosion and wear resistant PEEK Polymer.
- Contacting surfaces lubricated by sea water flowing through them.
-
- Reduces Chlorine, chlorine taste and odour. Decreases organic based colour, taste, odour, pesticides and chemicals.
- Media filtration using a bed of carbon, crushed glass, anthracite, crushed granite or other material.
- Fully automatic media filtration
- Used to filter water for various applications e.g. drinking, swimming pools, aquaculture, irrigation, stormwater management, oil and gas operations.
-
- Flows up to 3.0 L/s (180 L/m)
- Moulded twin head system ensures compact installation and no leaks
- Dual stage filtration for longer filter life
- Durable reinforced polypropylene filter housings
- Wall-mount brackets with all kits
- Max operating pressure: 830kPa
-
Autobackwashing Sediment Filter + Single Stage Bag Filter & UV Disinfection
- Flows up to 300l/min (5l/sec).
- First stage auto self cleaning screen filter extends life of UV pre-filter].
- Second stage, fine sediment removal filter bag.
- Supplied pre-assembled on heavy duty wall mount bracket.
- Designed for ease of installation and maintenance.
-
- Flows up to 1.0 L/s (60 L/m)
- Moulded twin head system ensures compact installation and no leaks
- Dual stage filtration for longer filter life
- Durable reinforced polypropylene filter housings
- Supplied with mounting screws and spanner, and wall-mount bracket
- Utilises high output eco-friendly UV disinfection technology to ensure maximum bacteria kill
- Max operating pressure: 830kPa
- Includes 316 S/S flexi connector and fittings to join filter housings to UV system
-
- Flows up to 3.0 L/s (180 L/m)
- Moulded twin head system ensures
- Dual stage filtration for longer filter life
- Durable reinforced polypropylene filter housings
- Supplied with mounting screws and spanner. Wall-mount bracket supplied separate
- Utilises high output eco-friendly UV disinfection technology to ensure maximum bacteria kill
- Max operating pressure: 830kPa
- Includes 316 S/S flexi connector and fittings to join filter housings to UV system
-
Autobackwashing Sediment Filter + Dual Stage Cartridge Filter & UV Disinfection
- Flows up to 300l/min (5l/sec)
- First stage auto self cleaning screen filter extends life of UV pre-filters
- Second stage, medium grade sediment removal prefilter.
- Third stage, fine sediment removal
- Supplied pre-assembled in lockable weather proof wall mount enclosure
- Designed for ease of installation and maintenance
-
Autobackwashing Sediment Filter + Single Stage Cartridge Filter & UV Disinfection
- Flows up to 180 l/m (3 l/sec).
- First stage, auto self cleaning screen filter extends life of UV pre-filter
- Second stage, fine sediment removal filter cartridge.
- Supplied pre-assembled with lockable weather-proof wall mount enclosure.
- Flexible 316 stainless steel connector between filtration and UV
- Design allows for compact installation and ease of maintenance.
-
- Complete purified water system incorporating RO, tank and distribution pumps
- Ideal for single/multiple Automatic Endoscope Reprocessors (AERs) feed, Washer-disinfectors and sterilisers
- Duplex RO units in a single SS304 skid, with wheels for maximum resilience
- Thermal disinfection at >80°C carried out automatically out of hours
- Water recirculates at user specified temperature via the UV and 0.04 micron endotoxin retention filter to all point(s) of use
- Compact and easy to install with footprints as small as 1400mm wide x 710mm deep (1950mm H)
- Quiet operation means suitable for positioning in washroom next to AER’s and in the CSSD if required (system can be supplied with panels for CSSD installation)
-
- Ideal for facilities with > 8 operating theatres
- Duplex RO systems on the same skid for maximum resilience
- Option of electrical or steam heating
- Prefabricated, skid-mounted modular system means quick installation and less downtime
- Thermal disinfection to >80°C automatically out of hours
- Water recirculates at elevated temperatures to all points of use (user adjustable)
- Designed to comply with HTM 01-06 and AS/NZS 4187 requirements
- Flexible, modular design concept offers 48 combination
-
- Complete purified water system incorporating RO, tank and distribution
- Ideal for single/multiple Automatic Endoscope Reprocessors (AERs) feed
- Thermal disinfection at >80°C carried out automatically out of hours
- Water recirculates at user specified temperature via the UV and 0.04 micron endotoxin retention flter to all point(s) of use
- Compact and easy to install with footprints as small as550mm wide x 600mm deep (1980mm H)
-
Single Glass AFM Media Filters: Superior sediment filtration removing up to 95% of particles down to 1 micron. As well as the efficient removal of hydrophobic hydrocarbons (oil & fats) organics and Microplastics. Duplex Glass AFM Media Filter for High Capacity Service Flow Rate: Sediment particle filtration to as low as 1 micron, removing hydrocarbons, organics and microplastics.
-
- High quality stainless steel piping and frame construction
- Dead zone free construction
- Tank-less heating technology, removing risk of potential endotoxin accumulation
- Remote monitoring and control functionality ensuring rapid response / support
- Demand-rated control and water recycling / recovery technology
-
- Flows up to 6.1 L/s
- Automatic backwash via timer control (Adjustable settings of 4hr, 8hr, 24hr, weekly and monthly)
- Extremely efficient screen cleaning ratio of 1:1 using point rotation principle
- Standard 100 micron stainless steel screen (Silver coated to inhibit bacterial growth)
- No interruption to water flow during screen cleaning
- Can be mounted in vertical or horizontal pipe runs
- Clear viewing glass enables full view of screen and backwash operation
- BMS connection for operation, fault, and backwash status available
- Fitted with DN80-DN200 screen for greater surface area
- Minimum operating pressure: 200kPa
- Pressure class: PN10
-
- Flows up to 6.1 L/s
- Automatic backwash via differential pressure and timer control
- Extremely efficient screen cleaning ratio of 1:1 using point rotation principle
- Standard 100 micron stainless steel screen (Silver coated to inhibit bacterial growth)
- No interruption to water flow during screen cleaning
- Can be mounted in vertical or horizontal pipe runs
- Clear viewing glass enables full view of screen and backwash operation
- BMS connection for operation, fault, and backwash status available
- Fitted with DN80-DN200 screen for greater surface area
- Minimum operating pressure: 200kPa
- Pressure class: PN10
-
- Flows up to 6.1 L/s
- Extremely efficient screen cleaning ratio of 1:1 using point rotation principle
- Standard 100 micron stainless steel screen (Silver coated to inhibit bacterial growth)
- No interruption to water flow during screen cleaning
- Can be mounted in vertical or horizontal pipe runs
- Clear viewing glass enables full view of screen and backwash operation
- Fitted with DN80-DN200 screen for greater surface area
- Minimum operating pressure: 200kPa
- Pressure class: PN10
-
- Flows up to 1.5 L/s
- Compact design ensures minimum installation disruption
- Backwash cleaning process via rotating suction arms
- 100 micron stainless steel screen
- No interruption to water flow during screen cleaning
- Can be mounted in vertical or horizontal pipe runs
- Clear viewing glass enables full view of screen and backwash operation
- Operating pressure range: 200 - 1600kPa
-
- Flows up to 21.6 L/s
- Automatic backwash via timer control (Adjustable settings of 4hr, 8hr, 24hr, weekly and monthly)
- Extremely efficient screen cleaning ratio of 1:1 using point rotation principle
- Standard 100 micron stainless steel screen (Silver coated to inhibit bacterial growth)
- No interruption to water flow during screen cleaning
- Can be mounted in vertical or horizontal pipe runs
- Clear viewing glass enables full view of screen and backwash operation
- BMS connection for operation, fault and backwash status available
- Minimum operating pressure: 200kPa
- Pressure class (25mm-DN65): PN16
- Pressure class (DN80-DN200): PN10
-
- Flows up to 55.5 L/s
- Automatic backwash via differential pressure and timer control
- Extremely efficient screen cleaning ratio of 1:1 using point rotation principle
- Standard 100 micron stainless steel screen (Silver coated to inhibit bacterial growth)
- No interruption to water flow during screen cleaning
- Can be mounted in vertical or horizontal pipe runs
- Clear viewing glass enables full view of screen and backwash operation
- BMS connection for operation, fault, and backwash status available
- Minimum operating pressure: 200kPa
- Pressure class (25mm-DN65): PN16
- Pressure class (DN80-DN200): PN10
-
- Flows up to 55.5 L/s
- Extremely efficient screen cleaning ratio of 1:1 using point rotation principle
- Standard 100 micron stainless steel screen (Silver coated to inhibit bacterial growth)
- No interruption to water flow during screen cleaning
- Can be mounted in vertical or horizontal pipe runs
- Clear viewing glass enables full view of screen and backwash operation
- Minimum operating pressure: 200kPa
- Pressure class (25mm-DN65): PN16
- Pressure class (DN80-DN200): PN10
-
- Flows up to 4.7 L/s
- Backwash cleaning process via rotating suction arms
- 100 micron stainless steel screen
- No interruption to water flow during screen cleaning
-
- Flows up to 4.7 L/s
- Automatic backwash via timer control (Adjustable settings of 24hr, weekly, monthly, and 2 monthly)
- Backwash cleaning process via rotating suction arms
- 100 micron stainless steel screen
- No interruption to water flow during screen cleaning
- Can be mounted in vertical or horizontal pipe runs
- Clear viewing glass enables full view of screen and backwash operation
- BMS connection for operation and fault status as standard
- Minimum operating pressure: 200kPa
- Pressure class: PN16
-
- High water purity with continuous recirculation through UV system and endotoxin retention filter
- Automatic Thermal Disinfection at over 80°C
- Compact footprint, with plug and play system with simple installation
- Delivering consistent purified water that meets AS5369:2023 Table 7.2 requirements
-
- Permeate flows up to 36,000 L/day
- Grundfos high pressure pump
- 5 micron sediment pre-filter
- Float switch, feed and permeate water pressure switches
- 4040 RO membranes
- EConnect controller - online live system performance monitoring
- Options - antiscalant dosing, permeate membrane rinse, raw water blending
- Permeate conductivity and temperature sensors
- Permeate, drain and recycle water rotameters
- Process controller with status of level, pressure and stop switches; permeate conductivity and temperature readout, alarm signal
-
An easy to install, fully flexible 316 stainless steel connector, that will save time and money on those difficult jobs joining A to B.
- Full bore - a 25mm threaded end has 25mm internal diameter pipe
- No deformity in the curvature
- No rubber or plastic hose that will reduce flow
- Will not corrode or rust
- No galvanic effect. No dielectric union required
- Resists work hardening
- WaterMark approved (ATS 5200.489:2009)
- Max operating pressure - 3,000kPa
- Max water temperature - 95ºC
-
- Flows up to 60L/m (5.4m3/h)
- Moulded twin head system ensures compact installation and no leaks
- Dual stage filtration for longer filter life
- Durable reinforced polypropylene filter housings
- Supplied with mounting screws and spanner
- Wall-mount bracket supplied separate
- Utilises high output eco-friendly UV disinfection technology to ensure maximum bacteria kill
- Max operating pressure: 830kPa
- Includes 316 S/S flexi connector and fittings to join filter housings to UV system
-
- Flows up to 60L/m (5.4m3/h)
- Moulded twin head system ensures compact installation and no leaks
- Dual stage filtration for longer filter life
- Durable reinforced polypropylene filter housings
- Supplied with mounting screws and spanner. Wall-mount bracket supplied separate
- Utilises high output eco-friendly UV disinfection technology to ensure maximum bacteria kill
- Max operating pressure: 830kPa
- Includes 316 S/S flexi connector and fittings to join filter housings to UV system
-
Single Sediment Removal Filter:
- High flow sediment filtration down to 5 micron with superior loading capacity.
- Suitable for dirt, rust, sand, and other fine particles.
- High flow sediment filtration down to 5 micron with superior loading capacity.
- Suitable for dirt, rust, sand, and other fine particles.
-
The SKAN FMA-1000 automatic screen filters provide reliable, low-maintenance filtration to keep water systems clean and protect equipment, even in demanding conditions. Designed for efficiency, they operate with minimal energy use and adapt to a wide range of applications.
- Ideal for remote areas – runs without a power supply thanks to its hydraulic operation system.
- Water-efficient – works effectively at low flow rates, reducing water use and supporting sustainability.
- Versatile applications – drinking water facilities, desalination plants, food production, co-generation plants, and chemical industries.
- Flexible use – also suited for cooling towers, field irrigation, and golf courses.
-
Delivers powerful, space-saving filtration for high-demand systems—the SKAN FMA-10000 series automatic mesh filters are designed to manage large flow rates with efficiency and reliability across a wide range of industries. FEATURES
- Handles high flow volumes with ease, making it ideal for municipal, industrial, and irrigation systems.
- Vertical design with multiple cartridges maximises filtration capacity while keeping the installation footprint compact.
- Electric actuation system ensures consistent performance where power is available.
- Suitable for applications such as drinking water facilities, desalination plants, food production, co-generation plants, chemical industries, and cooling towers.
- Provides a physical barrier against zebra mussels, protecting equipment and extending system life.
- Supports effective filtration for field irrigation and golf courses, helping maintain water quality and operational reliability.
-
Delivers reliable, low-maintenance filtration with minimal water use—the SKAN FMA-1000E automatic screen filter is built for performance in demanding conditions. Ideal for municipal and industrial use, it operates efficiently even at low flow rates. FEATURES
- Reduces water usage, lowering operating costs and minimising environmental impact.
- Performs reliably in harsh environments thanks to its electrically actuated cleaning mechanism.
- Improves efficiency in systems requiring low flow rates, making it well suited to municipal and industrial applications.
- Compatible with a wide range of settings including drinking water facilities, desalination plants, food production, co-generation plants, chemical industries, and cooling towers.
- Protects against zebra mussels with a physical filtration barrier, helping extend equipment life and reduce downtime.
-
Delivers reliable, high-precision filtration for demanding environments—the SKAN FMA-11000 series automatic mesh filters are built to handle large solids with ease, making them ideal for industrial, municipal, and agricultural applications. FEATURES
- Efficiently removes large solids with a scraper-based cleaning system, ensuring continuous operation and reducing maintenance.
- Provides clean, reliable results in high-precision filtration applications.
- Vertical design maximises filtration surface while saving on installation space.
- Offers effective roughing filtration, particularly well suited to irrigation systems and municipal water treatment.
- Ideal for use in drinking water facilities, desalination plants, food production, co-generation plants, chemical industries, cooling towers, field irrigation, and golf courses.
- Engineered for tough conditions, delivering consistent filtration across a wide range of applications.
Southland Filtration is a leading Australian provider of commercial water filtration solutions. We’ve been helping businesses since 1995 with a focus on quality, custom solutions, and reliable service. We work with businesses and organisations in Australia and New Zealand to address their unique water challenges and maintain the highest standards.