- Full bore - a 25mm threaded end has 25mm internal diameter pipe
- No deformity in the curvature
- No rubber or plastic hose that will reduce flow
- Will not corrode or rust
- No galvanic effect. No dielectric union required
- Resists work hardening
- WaterMark approved (ATS 5200.489:2009)
- Max operating pressure - 3,000kPa
- Max water temperature - 95ºC
-
An easy to install, fully flexible 316 stainless steel connector, that will save time and money on those difficult jobs joining A to B.
-
- Flows up to 66.0 L/s and higher
- Swing bolt lid closure mechanism
- Side inlet, bottom outlet
- Includes vent valve and pressure gauges
- Optional davit arm with hand wheel
- Available in 304, 316 & 316L stainless steel
- Max operating pressure: 1000kPa
-
- Flows up to 11.0 L/s
- Swing bolt lid closure mechanism
- Side inlet, bottom outlet
- Includes vent valve and pressure gauges
- 304 Grade stainless steel construction
- Max operating pressure: 1000kPa
- 25mm (1”) BSPF Inlet/Outlet
-
- Flows up to 5.0 L/s
- Swing bolt lid closure mechanism
- Side inlet, bottom outlet
- 304 Grade stainless steel construction
- Max operating pressure: 1000kPa
- High pressure units available (e.g., 1600kPa)
- 50mm (2”) BSPF Inlet/Outlet
-
- Flows up to 3.0 L/s
- Swing bolt lid closure mechanism
- Side inlet, bottom outlet
- Includes vent valve and pressure gauges
- 304 Grade stainless steel construction
- Max operating pressure: 1000kPa
- 25mm (1”) BSPF Inlet/Outlet
-
- Flows up to 3.0 L/s
- Durable reinforced polypropylene housings
- Pressure relief / bleed valve
- Supplied with wall-mount bracket and spanner
- Max operating pressure: 620kPa
- 40mm (1½”) BSPF Inlet/Outlet
-
- Flows up to 8.7 L/s
- Swingbolt lid closure mechanism
- Side inlet, side outlet
- Includes vent valve and pressure gauge
- 316 Grade stainless steel construction
- 50mm (2”) BSPF inlet/outlet
-
- Flows up to 3.0 L/s
- Durable reinforced polypropylene housings, larger diameter (4.5”)
- Pressure relief/bleed valve
- Supplied with mounting screws, bracket & spanner.
- Watermark® Certification
- Max operating pressure: 830kPa
- Max operating temperature: 45°C
- Min operating temperature: 4°C
-
- 10" 10 mm - Flows up to 0.66L/s (40L/m)
- 20" 20 mm - Flows up to 1.33L/s (80L/m)
- Durable reinforced polypropylene housings, standard diameter (2.5”)
- Pressure relief / bleed valve
- Supplied with wall-mount bracket and spanner
- Watermark® Certification
- Max operating pressure: 800kPa
- Min/Max operating temperature: 4°C/45°C
- Brass BSP inlet/outlet ports
- Carbon and resin options, please contact.
-
- Addresses hard water problems such as calcification, scaling, and spotting by removing magnesium and calcium hardness minerals and discarding them to drain.
- Single or multiple softener configurations
- 5-cycle automatic softener valves
- Water meter regeneration initiation
- Single, alternating, or twin metered controls
- Sequential or parallel controls for multiple softeners
- Free standing FRP fiberglass wrapped polyethylene resin tanks
- Heavy duty polyethylene brine tanks and lids
- Food grade high capacity softener resin
-
Single Sediment Removal Filter:
- High flow sediment filtration down to 5 micron with superior loading capacity.
- Suitable for dirt, rust, sand, and other fine particles.
- High flow sediment filtration down to 5 micron with superior loading capacity.
- Suitable for dirt, rust, sand, and other fine particles.
-
Single Glass AFM Media Filters: Superior sediment filtration removing up to 95% of particles down to 1 micron. As well as the efficient removal of hydrophobic hydrocarbons (oil & fats) organics and Microplastics. Duplex Glass AFM Media Filter for High Capacity Service Flow Rate: Sediment particle filtration to as low as 1 micron, removing hydrocarbons, organics and microplastics.
Southland Filtration is a leading Australian provider of commercial water filtration solutions. We’ve been helping businesses since 1995 with a focus on quality, custom solutions, and reliable service. We work with businesses and organisations in Australia and New Zealand to address their unique water challenges and maintain the highest standards.