Skip to content
-
- Addresses hard water problems such as calcification, scaling, and spotting by removing magnesium and calcium hardness minerals and discarding them to drain.
- Single or multiple softener configurations
- 5-cycle automatic softener valves
- Water meter regeneration initiation
- Single, alternating, or twin metered controls
- Sequential or parallel controls for multiple softeners
- Free standing FRP fiberglass wrapped polyethylene resin tanks
- Heavy duty polyethylene brine tanks and lids
- Food grade high capacity softener resin
-
- Specially designed and tested Sterilume™-EX lamps provide consistent and reliable ultraviolet output over the entire life of the lamp to ensure continuous purification
- Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation
- UV sensor to provide continuous readout of UV intensity
- The controller visually displays the remaining lamp life and will go into alarm if the lamp fails
- The controller has a sealed case to prevent damage from accidental water intrusion and is fully CSA and CE compliant
- Max operating pressure: 860kPa
-
- Specially designed and tested Sterilume™-HO lamps provide consistent and reliable ultraviolet output over the entire life of the lamp to ensure continuous purification
- Built with a durable 316L stainless steel chamber to prolong life and eliminate ultraviolet light degradation
- Specialised 254mm UV intensity sensor with output to enable solenoid valve or remote alarm (SHFM models)
- The controller visually displays the remaining lamp life and will go into alarm if the lamp fails
- Max operating pressure: 860kPa
-
- Specially designed and tested Sterilume™-EX lamps provide consistent and reliable ultraviolet output over the entire life of the lamp to ensure continuous purification
- Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation
- The controller visually displays the remaining lamp life and will go into alarm if the lamp fails
- The controller has a sealed case to prevent damage from accidental water intrusion and is fully CSA and CE compliant
- Max operating pressure: 860kPa
-
- High intensity lamps provide consistent and reliable ultraviolet output over the entire life of the lamp
- Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation
- Audible and visual lamp fail alarm
- Max operating pressure: 860kPa
- Volt free contacts for lamp fail alarm
- Higher pressure versions available (eg 1000kPa, 1600kPa)
-
- NSF55 Class A Certified (PRO10, 20, 30)
- USEPA UVDGM Validated (PRO 50)
- USEPA 2-Log Adenovirus validation (PRO24-100)
- USEPA 4-Log Adenovirus validation (PRO 24-186)
- CoolTouch Fan function to reduce water temperature
- Flow sensor monitor for real-time UV dose (PRO 10, 20, 30)
- LightWise technology allows controller to reduce lamp power during periods of no-flow to maintain water temperature below 40°C (PRO 10, 20, 30 only)
- Optional COMMcenter displays UV dose and can monitor up to 9 UV systems!
- Controller interface includes audible alarm, lamp/controller/fan/solenoid valve/sensor/flow-meter operation indicators, flow rate sensor set-point alarms
Page load link
Southland Filtration is a leading Australian provider of commercial water filtration solutions. We’ve been helping businesses since 1995 with a focus on quality, custom solutions, and reliable service. We work with businesses and organisations in Australia and New Zealand to address their unique water challenges and maintain the highest standards.